​What is the price of a System 2.0? 
The System 2.0 starts at € 22,900.00 plus any applicable taxes. Shipping is not included in the price of the system. Contact one of our staff members to get a customized quote on the System 2.0, additional options, and shipping to your location. A System 2.0 fully installed, with anchors and staff training will cost around £30,000.

​​Is there a warranty? 
The System 2.0 comes with a two year warranty which covers the replacement or repair of any defective parts. This does not include any service/maintenance work or travel expenses.

​​What size body of water do I need and how far can a System 2.0 span?
 That depends on the type of project, the needs of you and your clients, and the area where the cable is going. System 2.0 can accommodate a wide variety of bodies of water. This largely depends on what you will be using it for. It has been our experience that the System 2.0 is best utilized from 90 metres – 230 metres in length, 25 metres – 36 metres in width and 1 metre or more in depth for each System 2.0 installed. Sesitec does not recommend anything less than 60 metres x 25 metres x 1 metre (length/width/depth). Contact one of our staff members to discuss the details of your project, to determine what size works best for you.

​​What electricity does the System 2.0 require? 
400 volt – 3 phase – 25 amp is used to run the System 2.0.

​​What is my average electricity bill? 
It is very inexpensive to operate a System 2.0! If you use a generator you might be around 70p per hour, if you are plugged into a direct power supply then it can be as little as £2 to £3 per day!

​​Can I have my towers in the lake? 
Yes you can, some additional parts may be needed depending on your water depth. Sesitec has designed the System 2.0 to be very versatile and can be adapted to many installation situations. With over 300 System 2.0’s world wide we have installed in many different situations, including indoors, snow and all types of ground surfaces. Our water installs have seen towers in lakes, oceans, marinas, and rivers. Send us the Google Earth location to the proposed site that you are considering for System 2.0 and we will do a custom evaluation of the property for you.

​​Do I need a concrete pad under my towers? 
No, you do not.

​​How many anchors do I need and how big are they? 
This depends on where you are mounting the System 2.0 (land vs. water). You will be looking at a total of two anchors that are 1.5×1.5×1.5m rebar reinforced concrete for land installations. For water installations, we will need to know the depth and location of the anchor to better answer this question.

​​How long does the install take? 
The installation of a System 2.0 with all towers on land usually takes approximately 2 days. If it is a water installation this can take much longer. The installation is often the simple bit, we like to leave a member of staff with you for 2 to 4 weeks so we can train you sufficiently on how to operate, instruct, coach and maintain your wake park.

​​How do I prepare the site before the System 2.0 can be installed? 
There are three main elements for your site Prep.
- Anchors must be in and cured according to our install guide.
- Small enclosed building needs to be constructed to house electrical equipment 
according to our install guide.
- Electricity must be installed at the electrical
 building according to our install guide.
 Please contact one of our staff and request that our installation guide be sent to you. This will go through site preparation in more detail.

​​What equipment is necessary for install? 
There isn’t the need for a huge amount of expensive hire equipment, most of what you will need can be rented for a day or two locally. Here is a list of equipment that is generally used:
- Forklift, large bobcat or small crane
- At least a 15 hp boat or PWC
- Work platform or floating dock

​​What maintenance is required on a System 2.0? 
The System 2.0 is designed and manufactured to be simple and extremely durable. We will provide you with a comprehensive System 2.0 manual and will administer an onsite training course for those maintenance procedures. There are daily and monthly maintenance checks, which must be completed to keep your System 2.0 trouble free.

​​How long does it take to get parts if needed? 
We have spare parts in the UK and at the Seistec HQ in Germany. We can ship next day from both places.

​​Does the System 2.0 have an automatic mode? 
Yes it does, this is made possible by our proprietary System 2.0 Operating System. System 2.0 OS is simple and easy to use. You don’t need a computer science degree from Stanford to understand. Our software that tracks hours of use and allows adjustments of parameters like end points, turning points, home position, and acceleration/deceleration ramps. The nice thing about it is the speed is still adjustable in the automatic mode; you can change speeds at any point during operation via your controller. There are many ways to utilize the automatic mode to suit your situation. Please contact a staff member for more information.

​​Do you offer a Wireless Controller? 
Yes. It is called the Recon. It provides the same functionality as a wired controller without the limitations of where you can operate. With the Recon you can operate up to 90metres away from your motor tower and depending on your location this can go up to 215 metres plus.

​​Am I able to purchase the upgrades later such as Recon Wireless? 
Yes you don’t need to purchase all the bells and whistles at one time. As you use your System 2.0 you may realize that you want to purchase some upgrades such as a Recon Wireless Controller, extensions, or adjustable tower pieces, which are fully adaptable to the System 2.0 at any time. We are constantly innovating; contact one of our staff to find out what are the latest features that can be added to System 2.0.

​​Is the System modular; am I able to move it to another location? 
Yes, you are able to move it to another location. We have designed the System 2.0 to be very portable. You can easily take down your System to use for events or to move it to another location.